• Hard rubber backup pad.
• Provides firm support for Scotch-Brite Roloc Surface Conditioning Discs. (PNs 07480 - 07516) and Roloc Bristle Discs (PNs 07524 - 07532).
• Pad assemblies come complete with a 2" steel shaft adaptor.

• Available in 2" or 3" Sizes
• For use with sanding disc and prep pads

• 3” EVA Backing Pad with 1 1/4” nylon disc with hook surface for loop surface attachment for all loop-back micro wool or foam pads.
  Attaches to 3” Roll Lock Holder Back Plate (sold separately). Converts bolt-on backing plate to accept loop-back micro
  polishing and compounding pads.
• 3" Pads

• MICRO HOOK BACKING PLATE with 1/4" SPINDLE
• 3" Pads

• 69-100 EXTENDER BOLT•PROFESSIONAL Used to extend spindle on polishing machine. Use with Backing Plates and Double-Sided Pads.
• 69-101 For attachment of Backing Plate or Extender Bolt to 1/4", 3/8" or 1/2" drills.
• 69-102 DA PNEUMATIC ADAPTER Adapts standard 5/8" Arbor Hole on a compounding and polishing backing plate to attach to standard 5/16" pneumatic variable sanders and polishers.

• Allows any die grinder or drill to be turned into a cut-off tool using either 1\4" or 3\8" I.D. Cut-Off Wheels. Cutting tools should have safety guard. Always wear eye and face protection.

• Specifically made to use with the Hook-it discs.
• For use with 3 inch diameter Hookit™ Discs or 3 inch through 3 3/4 inch Finesse-it Buffing Pads.
• Fits random orbital sanders or other tools with 5/16" x 24 Internal thread.
• Pad face securely holds the discs yet allows for easy change and reattachment of discs.
• Lightweight, shock-resistant and well-balanced.
• Tough, durable plastic hub and conformable foam body are designed for a maximum operating speed of 7000 RPM.

• MICRO HOOK BACKING PLATE with 5/8"-11 THREAD
• 3" Pads

• Stick-It / PSA Flexible, round, palm sander fits comfortably in hand.
• Use with 6" sandpaper.
• Contours to flat or curved surfaces.
• When sander is turned 90° there is a new grit surface.

• Conformable pad with and elastic strap that holds the pad onto the hand for scuff sanding flat or contoured surfaces.
• Stick-it pad face provides easy attachment and removal with Stick-it Gold sandpaper discs.

• Made to use with the 3M Stick-it or other brands stick it (PSA) sand paper discs.
• Pad face securely holds the discs yet allows for easy change and reattachment of sandpaper discs.
• Lightweight, shock-resistant and well-balanced.
• Tough, durable plastic hub and a conformable foam body are designed for a maximum operating speed of 10000 RPM.
• 5/16" shaft diameter

• Professional dual action random orbital sanding pad
• 5” x 5/16” x 24” threads
• Max. operating speed: 10,000rpm

• Professional dual action random orbital sanding pads
• Available in 2 sizes for Stick-it / PSA paper 
  5” x 5/16” x 24” threads
  6" x 5/16" x 24" threads
• Max. operating speed: 10,000rpm

• Professional dual action random orbital sanding pads
• Available in Stick-it / PSA paper 
  5” x 5/16” x 24” threads
• Available in  6 " Velcro / hook & loop 6 hole design
• 6 hole design can be used with water or vacuum assisted sanders
• 6 hole pad can be used with solid or 6 hole paper  
• Max. operating speed: 10,000rpm

• Instant tack adhesive for bonding feathering discs.
• You can use many discs per adhesive application.
• Designed for very little pad buildup. You can clean pad with 3m part number 08984 (click the link to go to that page)

• Velcro / Hook-it / Hook & loop Flexible, round, palm sander fits comfortably in hand.
• Use with 6" sandpaper.
• Contours to flat or curved surfaces.
• When sander is turned 90° there is a new grit surface.

• Conformable pad with and elastic strap that holds the pad onto the hand for scuff sanding flat or contoured surfaces.
• 3M Hook-it pad face provides easy attachment and removal with 3M Hook-it discs.

• Specifically made to use with the 3M Hook-it Sand Paper Discs.
• Pad face securely holds the discs yet allows for easy change and reattachment of discs.
• Lightweight, shock-resistant and well-balanced.
• Tough, durable plastic hub and a conformable foam body are designed for a maximum operating speed of 10000 RPM.

• Professional dual action random orbital sanding pads
• Available in 2 firmness types
• 1 for Medium edge pad for loop back discs. Firm enough for flat surfaces yet soft enough for curved surfaces. Most commonly used with 120 grit and above sand paper (BP1026).
• 1 for Firm, low profile pad for loop backed discs. Provides maximum flatness. Most commonly used with 100 grit and below paper (BP1126).
• 6" x 5/16" x 24" threads
• Max. operating speed: 10,000rpm

• Conformable pad with and elastic strap that holds the pad onto the hand for scuff sanding flat or contoured surfaces.
• Hook-it II pad face provides easy attachment and removal with Hook-it II discs.

• Professional dual action random orbital sanding pads
• 6 bolt design.
• Max. operating speed: 10,000rpm

• Made of sturdy, durable, high-strength material.
• Shaped to fit the hand comfortably
• Embossed rubber face which allows good adhesion for 3M Stikit Sheet Rolls and 3M Stikit Production Sheets.
• PN05440 is designed to use one-third of a 3M Stikit Production sheet while PN05441 uses one-half of a 3M Stikit Production sheet.

• Made of tough flexible foam which allows the user to block sand on flat surfaces or contours.
• 3M Stikit sheets adhere firmly and won't slip or tear.

• Well-balanced, durable shop tool.
• Resistant to most solvents.
• Features a sturdy design that provides a non-twisting, flat sanding surface.
• Embossed rubber face that allows good adhesion release.
• Can be cleaned with lacquer thinner.
• 2-3/4" wide.

• Made of flexible rubber in two sizes.
• 2-3/4" x 4-1/4" size is used for applying glazing putty and plastic filler.
• 3" x 2" size is used for removing slush created with sanding with water.

• A firm hand sanding pad.
• To be used with a three-fold wrap of 3M Wet or dry Tri-M-ite Paper Sheets, 3M Imperial Wet or dry Color Sanding Paper Sheets or 3M Production Gold Paper Sheets.
• Makes hand sanding easier and more efficient.

• For use with 3M Stikit Tri-M-ite Sheet Rolls and 3M Imperial Color Sanding Paper Sheets.
• Provides a soft controlled touch.
• Eliminates finger marks and edge cutting into primer and paint.
• Ideal for contour and light scuff sanding.

• Specially designed holding slot grips sandpaper firmly to reduce slipping and tearing
• Easy-to-hold, soft, sanding block body material stays comfortable in the hand
• For Wet or Dry Use.
• Provides a soft controlled touch.
• Eliminates finger marks and edge cutting into primer, paint and Clears.
• Available in 2 different sizes.

AB

• Clip-style clamp holds abrasive paper tightly.
• Made of hardwood and mounted on an aluminum base with a cushioned bottom.
• Comfortable contoured handle.
• Specially designed holding slot grips sandpaper firmly to reduce slipping and tearing
• Available in different types / sizes.

• Model PF-16 Nearly indestructible Cycolac plastic for flexibility and long life.
• Flat surfaces or curves.
• Wet or Dry sanding.
• Uses standard 2¾" X 17½" sandpaper.

• Model AF-16 Tempered aluminum with cushioned base.
• Wet or Dry sanding.
• Uses 2¾" X 17½" sandpaper.

• Model AF-11 All-purpose sanding. Specification aluminum base with rubber cushion.
• Wet or Dry sanding.
• Uses 3" X 11" sheets.

• Model AF-8 Great for small areas.
• Tempered aluminum base permits wet or dry sanding.
• Long life for smart investment.
• Uses 3" X 8" sandpaper.

• Model F-16 Tempered masonite.
• Cushioned base.
• Not for wet sanding.
• Uses 2¾" X 17½" sandpaper.

• Model S-11 Medium radius file.
• For concave areas.
• Uses 3" X 11" abrasives.
• Not for wet sanding.

• Model C-11 Broad radius file.
• For gentle curves.
• Uses 4½" X 11" sheets.
• Not for wet sanding.

• Model R-11 Small radius file for intricate curves.
• Uses 3" X 11" abrasives.
• Not for wet sanding.

• Specially designed holding slot grips sandpaper firmly to reduce slipping and tearing
• Flexible, Air File sanding board with foam pad. Both wooden grips fit comfortably in hand.
• Use with Air File Clip On sandpaper.
• Contours to most flat and / or curved surfaces.

• These sanding blocks were designed for wet or dry sanding.
• 2 1/2" x 5 5/8"
• The Double Density Sanding block has two densities to accommodate a variety of sanding needs.
• Gray Side - Soft & Pliable
• Black Side - Stiff
   

• From scuff sanding E-coats to prepping blends, the Motor Guard Magna Backer Block distributes even pressure over the full area. Its power hooks firmly retain the scuff pad, imparting an even "tooth" over the entire panel with a single pass. Wet or dry, primers or E-coats, this is the block to scuff with. The BB-1 is sized to use 1/2 of a standard Scuff Pad and works with any brand or coarseness. Heavy duty, long life in shop environments.
• The perfect companion to our more rigid BB-1. The Motor Guard Magna Backer Block Soft distributes even pressure over the full area, no matter what the contour. The heavy-duty "T Hooks" securely hold the scuff pad to the block when used wet or dry and with any brand or grade of scuff pad. heavy duty long life in shop environments.

• Hand sanding just got a big power boost with the introduction of the Big-Block® from Motor Guard. Available in two lengths; 6-1/2” (BG6-1) and 12” (BG12-1), the Big-Block® is designed for use with 2-3/4” PSA rolls or standard sheets of abrasive paper. When extra power is needed, the Big-Block® is the answer. The unique design features three layers of engineered materials that permit just the right degree of flexibility to ensure even pressure over the large, flat sanding surface while eliminating heat transfer to the hand. Large flat or slightly curved panels can be blocked in a fraction of the time. A strong and comfortable grip is the key to the Big-Block®’s power. The exclusive, rounded top edge provides comfort while the soft center layer provides a finger recess for a super-strong grip. Flip the block over and the rounded edges can be used to power sand contours and recesses without the pressure points that come from sharp corners. The 6-1/2” model provides powerful one hand sanding over smaller areas while the 12” model allows two-handed power blocking on large panels

• The All New DUST DOCTOR® from Motor Guard revolutionizes hand sanding by providing an instant means of cleaning loaded abrasive sheets. This unique tool utilizes microfiber technology to pull sanding dust right from the paper. By dramatically reducing material costs as well as cutting down on the time spent changing paper, the cost savings are immediate. Microfiber technology has long been know for it ability to grab and hold up to five times its weight in dust The Dust-Doctor® (DD-1) uses this technology along with a soft foam cushion liner which work together to quickly unload abrasives during sanding. Shop air quality is improved and less time is spent on cleanup. The soft and flexible magnetic backing on the Dust-Doctor® allows placement directly adjacent to the area being sanded and relocation is a snap. The Dust-Doctor® has also proven to extend the life of abrasives and to radically reduce time spent cleaning and changing sheets. Users of this unique tool report improved productivity, reduced consumption of abrasives and better air quality in the shop.

• This unique, rugged, semi-rigid versatile sanding block is designed for flat to medium curved surfaces. The strategic hole pattern side provides multiple cutting edges, creating a 30% faster cutting surface, gripping the sandpaper, wet or dry. The back side provides rigidity and a comfortable, easy-to-hold surface. Works well on either catalyzed or non catalyzed materials.

• Unique sanding solutions for difficult applications. Hard side for PSA paper, extreme curving power for fender crowns and motorcycle tanks. Soft "Memory" side reduces pressure for nibs, louvers and other challenging surfaces.

• The Soft Blocks are unique, double-density blocks that act as two blocks in one, achieving the ultimate in block sanding of curved or irregular shaped surfaces. These blocks require no adhesives; sandpaper sticks like glue. The dense side is for more aggressive blocking, while the soft side is for color sanding.

• The roller block utilizes a 5-1/2”x9” abrasive sheet folded into thirds, the Roller-Block saves time by requiring no trimming and saves money by wasting no paper. PSA paper may also be used. Specifically designed for wet sanding applications, the Roller-Block’s soft outer layer retains water while providing a no-slip gripping surface for the abrasive sheet. A rigid inner layer maintains block shape and prevents the transfer of hand marks through the paper. The exclusive rounded sides of the block lift the folded edges of the paper away from the work surface, eliminating defects. The grip is firm and comfortable, little hand pressure is wasted holding the paper to the pad, allowing more pressure to be put into the work.

• The idea was simple – a sanding block that would fit the most commonly available abrasive paper – the 6” sanding disc. Simply wrap a 6” disc around a perfectly sized pad. The result was more than was expected. It just feels right in the hand. No trimming, no waste and every square inch of the disc available for sanding – just wrap it and rock.
• A radius edge provides the perfect surface for sanding contours and ridges. The soft outer pad surface forms a perfect bond to the paper and gives just enough for detailed jobs. Plus, it won’t load up with sanding dust. A rigid inner layer maintains pad shape and completely eliminates transfer of finger marks through the pad.
• Available for all 3 major types of sand paper : PSA , Hook-It & Hook-It II

• Contoured ergonomically designed blocks for maximum gripping power over flat to slightly curved surfaces. Their heavy duty construction provides long life in harsh environments, and supreme sanding power for the toughest applications.